[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 6.1.0-7-arm64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.20-1 (2023-03-19) [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.1 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x1ff012380-0x1ff014fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges [ 0.000000] percpu: Embedded 30 pages/cpu s83560 r8192 d31128 u122880 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: video=HDMI-A-1:1600x1200M@60 dma.dmachans=0x37f5 bcm2709.boardrev=0xd03141 bcm2709.serial=0xc2ac5161 bcm2709.uart_clock=48000000 smsc95xx.macaddr=E4:5F:01:E3:49:90 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait early_con [ 0.000000] Unknown kernel command line parameters "early_con", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x0000000033400000-0x0000000037400000] (64MB) [ 0.000000] Memory: 3977956K/8245248K available (12736K kernel code, 2752K rwdata, 18048K rodata, 6208K init, 610K bss, 299592K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 42837 entries in 168 pages [ 0.000000] ftrace: allocated 168 pages with 3 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000168] Console: colour dummy device 80x25 [ 0.000225] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000233] pid_max: default: 32768 minimum: 301 [ 0.000292] LSM: Security Framework initializing [ 0.000321] landlock: Up and running. [ 0.000322] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.000408] AppArmor: AppArmor initialized [ 0.000413] TOMOYO Linux initialized [ 0.000433] LSM support for eBPF active [ 0.000535] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000588] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001821] cblist_init_generic: Setting adjustable number of callback queues. [ 0.001831] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.001884] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.002016] rcu: Hierarchical SRCU implementation. [ 0.002018] rcu: Max phase no-delay instances is 1000. [ 0.003137] EFI services will not be available. [ 0.003446] smp: Bringing up secondary CPUs ... [ 0.003832] Detected PIPT I-cache on CPU1 [ 0.003919] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.004311] Detected PIPT I-cache on CPU2 [ 0.004361] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.004731] Detected PIPT I-cache on CPU3 [ 0.004784] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.004828] smp: Brought up 1 node, 4 CPUs [ 0.004832] SMP: Total of 4 processors activated. [ 0.004834] CPU features: detected: 32-bit EL0 Support [ 0.004836] CPU features: detected: 32-bit EL1 Support [ 0.004839] CPU features: detected: CRC32 instructions [ 0.004890] CPU: All CPU(s) started at EL2 [ 0.004900] alternatives: applying system-wide alternatives [ 0.073494] node 0 deferred pages initialised in 68ms [ 0.074859] devtmpfs: initialized [ 0.080042] Registered cp15_barrier emulation handler [ 0.080055] Registered setend emulation handler [ 0.080185] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.080222] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.081661] pinctrl core: initialized pinctrl subsystem [ 0.082506] DMI not present or invalid. [ 0.082840] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.084186] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.084682] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.085629] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.085656] audit: initializing netlink subsys (disabled) [ 0.085818] audit: type=2000 audit(0.084:1): state=initialized audit_enabled=0 res=1 [ 0.086397] thermal_sys: Registered thermal governor 'fair_share' [ 0.086402] thermal_sys: Registered thermal governor 'bang_bang' [ 0.086404] thermal_sys: Registered thermal governor 'step_wise' [ 0.086406] thermal_sys: Registered thermal governor 'user_space' [ 0.086408] thermal_sys: Registered thermal governor 'power_allocator' [ 0.086528] cpuidle: using governor ladder [ 0.086546] cpuidle: using governor menu [ 0.086693] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.086751] ASID allocator initialised with 32768 entries [ 0.086993] Serial: AMBA PL011 UART driver [ 0.094646] KASLR enabled [ 0.097870] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.097876] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.097880] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.097882] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.097885] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.097887] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.097890] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.097892] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.108760] ACPI: Interpreter disabled. [ 0.108983] iommu: Default domain type: Translated [ 0.108987] iommu: DMA domain TLB invalidation policy: strict mode [ 0.109131] EDAC MC: Ver: 3.0.0 [ 0.109950] NetLabel: Initializing [ 0.109953] NetLabel: domain hash size = 128 [ 0.109955] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.109992] NetLabel: unlabeled traffic allowed by default [ 0.110129] vgaarb: loaded [ 0.110360] clocksource: Switched to clocksource arch_sys_counter [ 0.110713] VFS: Disk quotas dquot_6.6.0 [ 0.110746] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.111206] AppArmor: AppArmor Filesystem Enabled [ 0.111261] pnp: PnP ACPI: disabled [ 0.115875] NET: Registered PF_INET protocol family [ 0.116501] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.120328] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.120595] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.120907] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.122202] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.125300] TCP: Hash tables configured (established 65536 bind 65536) [ 0.125810] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.126223] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.126408] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.126854] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.126906] NET: Registered PF_XDP protocol family [ 0.126918] PCI: CLS 0 bytes, default 64 [ 0.127469] Trying to unpack rootfs image as initramfs... [ 0.130646] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.131142] kvm [1]: IPA Size Limit: 44 bits [ 0.133720] kvm [1]: vgic interrupt IRQ9 [ 0.133830] kvm [1]: Hyp mode initialized successfully [ 0.147230] Initialise system trusted keyrings [ 0.147311] Key type blacklist registered [ 0.147693] workingset: timestamp_bits=42 max_order=21 bucket_order=0 [ 0.150955] zbud: loaded [ 0.151749] integrity: Platform Keyring initialized [ 0.151772] integrity: Machine keyring initialized [ 0.151776] Key type asymmetric registered [ 0.151780] Asymmetric key parser 'x509' registered [ 1.140008] Freeing initrd memory: 32520K [ 1.153529] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.153616] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.153735] io scheduler mq-deadline registered [ 1.155921] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 18) [ 1.159558] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.159953] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.159962] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.159978] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 [ 1.159992] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000 [ 1.160577] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.160583] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.160588] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 1.160613] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.160660] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.161627] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.288412] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.288443] pci 0000:01:00.0: [1b21:1064] type 00 class 0x010601 [ 1.288464] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff] [ 1.288503] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff] [ 1.288514] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 1.288526] pci 0000:01:00.0: enabling Extended Tags [ 1.288596] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.288650] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 7.876 Gb/s with 8.0 GT/s PCIe x1 link) [ 1.298387] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.298406] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff] [ 1.298414] pci 0000:01:00.0: BAR 6: assigned [mem 0x600000000-0x60007ffff pref] [ 1.298419] pci 0000:01:00.0: BAR 0: assigned [mem 0x600080000-0x600081fff] [ 1.298426] pci 0000:01:00.0: BAR 5: assigned [mem 0x600082000-0x600083fff] [ 1.298434] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.298439] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.298534] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 1.298602] pcieport 0000:00:00.0: PME: Signaling with IRQ 23 [ 1.298770] pcieport 0000:00:00.0: AER: enabled with IRQ 23 [ 1.299520] simple-framebuffer 3e474000.framebuffer: framebuffer at 0x3e474000, 0x753000 bytes [ 1.299526] simple-framebuffer 3e474000.framebuffer: format=a8r8g8b8, mode=1600x1200x32, linelength=6400 [ 1.303142] Console: switching to colour frame buffer device 200x75 [ 1.306414] simple-framebuffer 3e474000.framebuffer: fb0: simplefb registered! [ 1.311515] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.312454] printk: console [ttyS1] disabled [ 1.312502] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 31, base_baud = 62499999) is a 16550 [ 1.344924] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 1.344937] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 1.344941] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=000000c0/00002000 [ 1.344946] pcieport 0000:00:00.0: [ 6] BadTLP [ 1.344950] pcieport 0000:00:00.0: [ 7] BadDLLP [ 1.348244] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 1.348252] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 1.348255] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 1.348260] pcieport 0000:00:00.0: [ 7] BadDLLP [ 1.356394] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0 [ 1.356401] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 1.356404] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 1.356408] pcieport 0000:00:00.0: [ 7] BadDLLP [ 1.376277] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0 [ 1.376284] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 1.376287] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 1.376291] pcieport 0000:00:00.0: [ 7] BadDLLP [ 1.381777] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 1.381784] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 1.381787] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=000000c0/00002000 [ 1.381791] pcieport 0000:00:00.0: [ 6] BadTLP [ 1.381794] pcieport 0000:00:00.0: [ 7] BadDLLP [ 1.384371] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 1.384378] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 1.384381] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=000000c0/00002000 [ 1.384385] pcieport 0000:00:00.0: [ 6] BadTLP [ 1.384388] pcieport 0000:00:00.0: [ 7] BadDLLP [ 1.390666] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 1.390673] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 1.390676] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=000000c0/00002000 [ 1.390680] pcieport 0000:00:00.0: [ 6] BadTLP [ 1.390683] pcieport 0000:00:00.0: [ 7] BadDLLP [ 1.396961] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 1.396967] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 1.396971] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=000000c0/00002000 [ 1.396974] pcieport 0000:00:00.0: [ 6] BadTLP [ 1.396977] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.684485] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.684493] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.684497] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.684501] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.690693] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0 [ 2.690700] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.690703] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.690707] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.698043] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.698049] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.698052] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.698056] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.707858] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.707865] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.707868] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.707872] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.716352] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.716359] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.716362] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.716366] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.722557] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.722564] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.722567] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.722571] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.730699] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.730705] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.730709] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.730712] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.740515] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.740522] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.740525] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=000000c0/00002000 [ 2.740528] pcieport 0000:00:00.0: [ 6] BadTLP [ 2.740531] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.749012] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.749018] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.749022] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.749026] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.755215] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.755221] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.755224] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.755228] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.761417] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.761424] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.761427] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.761431] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.769561] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.769568] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.769571] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=000000c0/00002000 [ 2.769574] pcieport 0000:00:00.0: [ 6] BadTLP [ 2.769577] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.769582] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0 [ 2.769587] pcieport 0000:00:00.0: AER: can't find device of ID0000 [ 2.779387] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.779394] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.779397] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=000000c0/00002000 [ 2.779401] pcieport 0000:00:00.0: [ 6] BadTLP [ 2.779404] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.787884] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.787890] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.787893] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=000000c0/00002000 [ 2.787897] pcieport 0000:00:00.0: [ 6] BadTLP [ 2.787900] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.794088] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.794095] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.794098] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=000000c0/00002000 [ 2.794101] pcieport 0000:00:00.0: [ 6] BadTLP [ 2.794104] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.800294] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.800300] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.800303] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=000000c0/00002000 [ 2.800307] pcieport 0000:00:00.0: [ 6] BadTLP [ 2.800310] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.808441] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.808447] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.808451] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=000000c0/00002000 [ 2.808454] pcieport 0000:00:00.0: [ 6] BadTLP [ 2.808457] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.818260] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.818267] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.818270] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.818273] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.826755] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.826762] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.826764] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.826768] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.832956] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.832963] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.832966] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.832970] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.839158] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.839165] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.839168] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.839171] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.847304] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.847311] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.847314] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=000000c0/00002000 [ 2.847317] pcieport 0000:00:00.0: [ 6] BadTLP [ 2.847320] pcieport 0000:00:00.0: [ 7] BadDLLP [ 2.857135] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0 [ 2.857141] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2.857145] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000 [ 2.857148] pcieport 0000:00:00.0: [ 7] BadDLLP [ 3.688656] printk: console [ttyS1] enabled [ 3.693405] Serial: AMBA driver [ 3.696779] msm_serial: driver initialized [ 3.702191] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.710034] mousedev: PS/2 mouse device common for all mice [ 3.716211] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 3.723299] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 3.731022] ledtrig-cpu: registered to indicate activity on CPUs [ 3.737589] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 3.823797] NET: Registered PF_INET6 protocol family [ 3.841236] Segment Routing with IPv6 [ 3.845021] In-situ OAM (IOAM) with IPv6 [ 3.849049] mip6: Mobile IPv6 [ 3.852066] NET: Registered PF_PACKET protocol family [ 3.857250] mpls_gso: MPLS GSO support [ 3.861599] registered taskstats version 1 [ 3.865776] Loading compiled-in X.509 certificates [ 3.907257] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 3.916126] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 3.928290] zswap: loaded using pool lzo/zbud [ 3.933115] Key type .fscrypt registered [ 3.937098] Key type fscrypt-provisioning registered [ 3.953764] Key type encrypted registered [ 3.957853] AppArmor: AppArmor sha1 policy hashing enabled [ 3.963467] ima: No TPM chip found, activating TPM-bypass! [ 3.969042] ima: Allocated hash algorithm: sha256 [ 3.973835] ima: No architecture policies found [ 3.978454] evm: Initialising EVM extended attributes: [ 3.983662] evm: security.selinux [ 3.987018] evm: security.SMACK64 (disabled) [ 3.991344] evm: security.SMACK64EXEC (disabled) [ 3.996022] evm: security.SMACK64TRANSMUTE (disabled) [ 4.001144] evm: security.SMACK64MMAP (disabled) [ 4.005828] evm: security.apparmor [ 4.009272] evm: security.ima [ 4.012274] evm: security.capability [ 4.015893] evm: HMAC attrs: 0x1 [ 4.222934] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 33, base_baud = 0) is a PL011 rev2 [ 4.232070] serial serial0: tty port ttyAMA0 registered [ 4.238009] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-08-26T14:03:16 [ 4.248198] gpio-449 (ant1): hogged as output/high [ 4.254336] gpio-453 (ant2): hogged as output/low [ 4.259420] uart-pl011 fe201000.serial: Failed to create device link (0x180) with soc:firmware:gpio [ 4.280997] Freeing unused kernel memory: 6208K [ 4.335482] Checked W+X mappings: passed, no W+X pages found [ 4.341262] Run /init as init process Loading, please wait... Starting systemd-udevd version 252.6-1 [ 4.611778] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 4.619275] usb_phy_generic phy: dummy supplies not allowed for exclusive requests [ 4.619516] sdhci: Secure Digital Host Controller Interface driver [ 4.633254] sdhci: Copyright(c) Pierre Ossman [ 4.644802] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.657723] sdhci-iproc fe300000.mmc: allocated mmc-pwrseq [ 4.673910] SCSI subsystem initialized [ 4.706401] mmc1: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 4.722396] mmc0: SDHCI controller on fe300000.mmc [fe300000.mmc] using PIO [ 4.743528] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 4.752368] usbcore: registered new interface driver usbfs [ 4.758189] usbcore: registered new interface driver hub [ 4.763692] usbcore: registered new device driver usb [ 4.773228] ahci 0000:01:00.0: enabling device (0000 -> 0002) [ 4.779510] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled [ 4.786397] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode [ 4.795148] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst [ 4.795998] pps_core: LinuxPPS API ver. 1 registered [ 4.809274] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 4.821977] PTP clock support registered [ 4.830845] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator [ 4.839034] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator [ 4.850391] mmc1: new ultra high speed DDR50 SDHC card at address 0001 [ 4.858373] mmcblk1: mmc1:0001 00000 29.8 GiB [ 4.864974] mmcblk1: p1 p2 [ 4.869178] scsi host0: ahci [ 4.870510] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 4.872621] scsi host1: ahci [ 4.882537] scsi host2: ahci [ 4.886208] scsi host3: ahci [ 4.889734] scsi host4: ahci [ 4.893184] scsi host5: ahci [ 4.896658] scsi host6: ahci [ 4.898555] dwc2 fe980000.usb: DWC OTG Controller [ 4.899987] scsi host7: ahci [ 4.904418] dwc2 fe980000.usb: new USB bus registered, assigned bus number 1 [ 4.907871] scsi host8: ahci [ 4.914548] dwc2 fe980000.usb: irq 39, io mem 0xfe980000 [ 4.917956] scsi host9: ahci [ 4.922990] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 4.926398] scsi host10: ahci [ 4.934144] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.937795] scsi host11: ahci [ 4.944468] usb usb1: Product: DWC OTG Controller [ 4.944473] usb usb1: Manufacturer: Linux 6.1.0-7-arm64 dwc2_hsotg [ 4.944477] usb usb1: SerialNumber: fe980000.usb [ 4.945008] hub 1-0:1.0: USB hub found [ 4.948092] scsi host12: ahci [ 4.952346] hub 1-0:1.0: 1 port detected [ 4.959271] scsi host13: ahci [ 4.977634] scsi host14: ahci [ 4.980203] mmc0: new high speed SDIO card at address 0001 [ 4.981093] scsi host15: ahci [ 4.989786] scsi host16: ahci [ 4.993235] scsi host17: ahci [ 4.996635] scsi host18: ahci [ 5.000029] scsi host19: ahci [ 5.003408] scsi host20: ahci [ 5.006790] scsi host21: ahci [ 5.010144] scsi host22: ahci [ 5.013499] scsi host23: ahci [ 5.016680] ata1: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082100 irq 38 [ 5.024366] ata2: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082180 irq 38 [ 5.032043] ata3: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082200 irq 38 [ 5.039720] ata4: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082280 irq 38 [ 5.047395] ata5: DUMMY [ 5.049868] ata6: DUMMY [ 5.052342] ata7: DUMMY [ 5.054816] ata8: DUMMY [ 5.057288] ata9: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082500 irq 38 [ 5.064965] ata10: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082580 irq 38 [ 5.072730] ata11: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082600 irq 38 [ 5.080494] ata12: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082680 irq 38 [ 5.088258] ata13: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082700 irq 38 [ 5.096022] ata14: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082780 irq 38 [ 5.103786] ata15: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082800 irq 38 [ 5.111550] ata16: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082880 irq 38 [ 5.119317] ata17: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082900 irq 38 [ 5.127082] ata18: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082980 irq 38 [ 5.134847] ata19: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082a00 irq 38 [ 5.142610] ata20: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082a80 irq 38 [ 5.150374] ata21: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082b00 irq 38 [ 5.158138] ata22: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082b80 irq 38 [ 5.165902] ata23: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082c00 irq 38 [ 5.173666] ata24: SATA max UDMA/133 abar m8192@0x600082000 port 0x600082c80 irq 38 [ 5.262369] usb 1-1: new high-speed USB device number 2 using dwc2 [ 5.474476] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 5.482778] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.490396] hub 1-1:1.0: USB hub found [ 5.494270] hub 1-1:1.0: 4 ports detected [ 5.786365] usb 1-1.1: new full-speed USB device number 3 using dwc2 [ 5.893042] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 5.901518] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.908930] usb 1-1.1: Product: USB Receiver [ 5.913258] usb 1-1.1: Manufacturer: Logitech [ 5.931175] hid: raw HID events driver (C) Jiri Kosina [ 5.998368] usb 1-1.2: new full-speed USB device number 4 using dwc2 [ 6.103276] usb 1-1.2: New USB device found, idVendor=04d9, idProduct=0132, bcdDevice= 1.10 [ 6.111755] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=3 [ 6.119168] usb 1-1.2: Product: USB Keyboard [ 6.123495] usb 1-1.2: SerialNumber: 000000000008 [ 6.146336] usbcore: registered new interface driver usbhid [ 6.152014] usbhid: USB HID core driver [ 6.334366] ata1: found unknown device (class 0) [ 6.339069] ata1: SATA link down (SStatus 0 SControl 300) [ 6.656561] ata2: SATA link down (SStatus 0 SControl 300) [ 6.976560] ata3: SATA link down (SStatus 0 SControl 300) [ 7.296560] ata4: SATA link down (SStatus 0 SControl 300) [ 7.616558] ata9: SATA link down (SStatus 0 SControl 300) [ 7.936570] ata10: SATA link down (SStatus 0 SControl 300) [ 8.256559] ata11: SATA link down (SStatus 0 SControl 300) [ 8.576557] ata12: SATA link down (SStatus 0 SControl 300) [ 8.896557] ata13: SATA link down (SStatus 0 SControl 300) [ 9.216557] ata14: SATA link down (SStatus 0 SControl 300) [ 9.536557] ata15: SATA link down (SStatus 0 SControl 300) [ 9.856571] ata16: SATA link down (SStatus 0 SControl 300) [ 10.176558] ata17: SATA link down (SStatus 0 SControl 300) [ 10.496569] ata18: SATA link down (SStatus 0 SControl 300) [ 10.816557] ata19: SATA link down (SStatus 0 SControl 300) [ 11.136569] ata20: SATA link down (SStatus 0 SControl 300) [ 11.456559] ata21: SATA link down (SStatus 0 SControl 300) [ 11.776568] ata22: SATA link down (SStatus 0 SControl 300) [ 12.096557] ata23: SATA link down (SStatus 0 SControl 300) [ 12.416556] ata24: SATA link down (SStatus 0 SControl 300) [ 12.441637] input: Logitech USB Receiver as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52B.0001/input/input0 [ 12.510774] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-fe980000.usb-1.1/input0 [ 12.524103] input: Logitech USB Receiver Mouse as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input1 [ 12.537251] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input2 [ 12.610423] input: Logitech USB Receiver System Control as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input3 [ 12.624391] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-fe980000.usb-1.1/input1 [ 12.637931] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-fe980000.usb-1.1/input2 [ 12.650887] input: USB Keyboard as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0132.0004/input/input5 [ 12.722617] hid-generic 0003:04D9:0132.0004: input,hidraw3: USB HID v1.11 Keyboard [USB Keyboard] on usb-fe980000.usb-1.2/input0 [ 12.734755] hid-generic 0003:04D9:0132.0005: hiddev2,hidraw4: USB HID v1.11 Device [USB Keyboard] on usb-fe980000.usb-1.2/input1 [ 12.747081] input: USB Keyboard System Control as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:04D9:0132.0006/input/input6 [ 12.818424] input: USB Keyboard Consumer Control as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:04D9:0132.0006/input/input7 [ 12.831629] input: USB Keyboard Mouse as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:04D9:0132.0006/input/input8 [ 12.843959] input: USB Keyboard as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:04D9:0132.0006/input/input9 [ 12.855680] hid-generic 0003:04D9:0132.0006: input,hidraw5: USB HID v1.11 Mouse [USB Keyboard] on usb-fe980000.usb-1.2/input2 [ 13.031698] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-fe980000.usb-1.1/input2 [ 13.165056] input: Logitech Wireless Device PID:1017 Mouse as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:1017.0007/input/input10 [ 13.181280] hid-generic 0003:046D:1017.0007: input,hidraw1: USB HID v1.11 Mouse [Logitech Wireless Device PID:1017] on usb-fe980000.usb-1.1/input2:1 [ 13.238027] input: Logitech Anywhere MX as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:1017.0007/input/input14 [ 13.252427] logitech-hidpp-device 0003:046D:1017.0007: input,hidraw1: USB HID v1.11 Mouse [Logitech Anywhere MX] on usb-fe980000.usb-1.1/input2:1 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.38.1 [/sbin/fsck.ext4 (1) -- /dev/mmcblk1p2] fsck.ext4 -y -C0 /dev/mmcblk1p2 e2fsck 1.46.6 (1-Feb-2023) RASPIROOT: clean, 35118/1868720 files, 757646/7684096 blocks done. [ 13.498289] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 13.628534] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 13.979930] systemd[1]: System time before build time, advancing clock. [ 14.037776] systemd[1]: Inserted module 'autofs4' [ 14.101181] systemd[1]: systemd 252.6-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 14.133573] systemd[1]: Detected architecture arm64. Welcome to Debian GNU/Linux 12 (bookworm)! [ 14.174601] systemd[1]: Hostname set to . [ 14.553007] systemd[1]: Queued start job for default target graphical.target. [ 14.576947] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ OK ] Created slice system-getty.slice - Slice /system/getty. [ 14.603433] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ OK ] Created slice system-modpr…lice - Slice /system/modprobe. [ 14.631459] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ OK ] Created slice system-seria… - Slice /system/serial-getty. [ 14.659390] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ OK ] Created slice system-syste… - Slice /system/systemd-fsck. [ 14.687132] systemd[1]: Created slice user.slice - User and Session Slice. [ OK ] Created slice user.slice - User and Session Slice. [ 14.710644] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ OK ] Started systemd-ask-passwo…quests to Console Directory Watch. [ 14.738548] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ OK ] Started systemd-ask-passwo… Requests to Wall Directory Watch. [ 14.766893] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount proc-sys-…rmats File System Automount Point. [ 14.798513] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ OK ] Reached target cryptsetup.…get - Local Encrypted Volumes. [ 14.822443] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ OK ] Reached target integrityse…Local Integrity Protected Volumes. [ 14.850462] systemd[1]: Reached target paths.target - Path Units. [ OK ] Reached target paths.target - Path Units. [ 14.874437] systemd[1]: Reached target remote-cryptsetup.target - Remote Encrypted Volumes. [ OK ] Reached target remote-cryp…et - Remote Encrypted Volumes. [ 14.902419] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ OK ] Reached target remote-fs.target - Remote File Systems. [ 14.926418] systemd[1]: Reached target remote-veritysetup.target - Remote Verity Protected Volumes. [ OK ] Reached target remote-veri…- Remote Verity Protected Volumes. [ 14.954418] systemd[1]: Reached target slices.target - Slice Units. [ OK ] Reached target slices.target - Slice Units. [ 14.978435] systemd[1]: Reached target swap.target - Swaps. [ OK ] Reached target swap.target - Swaps. [ 14.998440] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ OK ] Reached target veritysetup… - Local Verity Protected Volumes. [ 15.026836] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ OK ] Listening on systemd-fsckd…sck to fsckd communication Socket. [ 15.054594] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ OK ] Listening on systemd-initc… initctl Compatibility Named Pipe. [ 15.082889] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ OK ] Listening on systemd-journ…socket - Journal Audit Socket. [ 15.110789] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ OK ] Listening on systemd-journ…t - Journal Socket (/dev/log). [ 15.138786] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ OK ] Listening on systemd-journald.socket - Journal Socket. [ 15.162862] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. [ OK ] Listening on systemd-netwo… - Network Service Netlink Socket. [ 15.191402] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ OK ] Listening on systemd-udevd….socket - udev Control Socket. [ 15.218732] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ OK ] Listening on systemd-udevd…l.socket - udev Kernel Socket. [ 15.262664] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... Mounting dev-hugepages.mount - Huge Pages File System... [ 15.289211] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... Mounting dev-mqueue.mount€¦POSIX Message Queue File System... [ 15.317111] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... Mounting sys-kernel-debug.… - Kernel Debug File System... [ 15.345106] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... Mounting sys-kernel-tracin… - Kernel Trace File System... [ 15.390835] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... Starting kmod-static-nodes…ate List of Static Device Nodes... [ 15.421427] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... Starting modprobe@configfs…m - Load Kernel Module configfs... [ 15.449537] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... Starting modprobe@dm_mod.s…[0m - Load Kernel Module dm_mod... [ 15.490197] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 15.502668] device-mapper: uevent: version 1.0.3 [ 15.506924] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 15.507655] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com Starting modprobe@drm.service - Load Kernel Module drm... [ 15.545629] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... Starting modprobe@efi_psto…- Load Kernel Module efi_pstore... [ 15.573497] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... Starting modprobe@fuse.ser…e - Load Kernel Module fuse... [ 15.601675] fuse: init (API version 7.37) [ 15.602064] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... Starting modprobe@loop.ser…e - Load Kernel Modul[ 15.619761] loop: module loaded e loop... [ 15.650804] systemd[1]: Starting nftables.service - nftables... Starting nftables.service - nftables... [ 15.670654] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 15.691908] systemd[1]: Starting systemd-journald.service - Journal Service... Starting systemd-journald.service - Journal Service... [ 15.724233] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... Starting systemd-modules-l…rvice - Load Kernel Modules... [ 15.753755] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line... Starting systemd-network-g… units from Kernel command line... [ 15.785596] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... Starting systemd-remount-f…nt Root and Kernel File Systems... [ 15.809634] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none. [ 15.819025] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... Starting systemd-udev-trig…[0m - Coldplug All udev Devices... [ 15.852516] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ OK ] Mounted dev-hugepages.mount - Huge Pages File System. [ 15.879008] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ OK ] Mounted dev-mqueue.mount€¦- POSIX Message Queue File System. [ 15.907006] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ OK ] Mounted sys-kernel-debug.m…nt - Kernel Debug File System. [ 15.934915] systemd[1]: Started systemd-journald.service - Journal Service. [ OK ] Started systemd-journald.service - Journal Service. [ OK ] Mounted sys-kernel-tracing…nt - Kernel Trace File System. [ OK ] Finished kmod-static-nodes…reate List of Static Device Nodes. [ OK ] Finished modprobe@configfs…[0m - Load Kernel Module configfs. [ OK ] Finished modprobe@dm_mod.s…e - Load Kernel Module dm_mod. [ OK ] Finished modprobe@drm.service - Load Kernel Module drm. [ OK ] Finished modprobe@efi_psto…m - Load Kernel Module efi_pstore. [ OK ] Finished modprobe@fuse.service - Load Kernel Module fuse. [ OK ] Finished modprobe@loop.service - Load Kernel Module loop. [ OK ] Finished nftables.service - nftables. [ OK ] Finished systemd-modules-l…service - Load Kernel Modules. [ OK ] Finished systemd-network-g…rk units from Kernel command line. [ OK ] Finished systemd-remount-f…ount Root and Kernel File Systems. [ OK ] Reached target network-pre…get - Preparation for Network. Mounting sys-fs-fuse-conne… - FUSE Control File System... Mounting sys-kernel-config…ernel Configuration File System... Starting systemd-journal-f…h Journal to Persistent Storage... [ 16.338952] systemd-journald[300]: Received client request to flush runtime journal. Starting systemd-random-se…ice - Load/Save Random Seed... Starting systemd-sysctl.se…c[ 16.370032] systemd-journald[300]: File /var/log/journal/ed150dfe012a483ab21cbfe1f46be63c/system.journal corrupted or uncleanly shut down, renaming and replacing. e - Apply Kernel Variables... Starting systemd-sysusers.…rvice - Create System Users... [ OK ] Finished systemd-udev-trig…e - Coldplug All udev Devices. [ OK ] Mounted sys-fs-fuse-connec…nt - FUSE Control File System. [ OK ] Mounted sys-kernel-config.… Kernel Configuration File System. [ OK ] Finished systemd-sysctl.service - Apply Kernel Variables. Starting ifupdown-pre.serv…ynchronize boot up for ifupdown... [ OK ] Finished systemd-random-se…rvice - Load/Save Random Seed. [ OK ] Finished systemd-sysusers.service - Create System Users. Starting systemd-tmpfiles-…ate Static Device Nodes in /dev... [ OK ] Finished systemd-journal-f…ush Journal to Persistent Storage. [ OK ] Finished systemd-tmpfiles-…reate Static Device Nodes in /dev. [ OK ] Reached target local-fs-pr…reparation for Local File Systems. Starting systemd-udevd.ser…ger for Device Events and Files... [ OK ] Started systemd-udevd.serv…nager for Device Events and Files. Starting systemd-networkd.…ice - Network Configuration... [ OK ] Found device dev-ttyS1.device - /dev/ttyS1. [ OK ] Found device dev-disk-by\x…0m - /dev/disk/by-label/RASPIFIRM. Starting systemd-fsck@dev-…on /dev/disk/by-label/RASPIFIRM... [ 17.796385] vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 17.815057] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 17.832873] iproc-rng200 fe104000.rng: hwrng registered [ 17.869305] [drm] Initialized v3d 1.0.0 20180419 for fec00000.gpu on minor 0 [ OK ] Started systemd-fsckd.serv…tem Check Daemon to report status. [ 17.999294] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 18.016205] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 18.024756] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 18.034615] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 18.045068] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 18.055285] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 18.069477] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ OK ] Finished systemd-fsck@dev-…k on /dev/disk/by-label/RASPIFIRM. Mounting boot-firmware.mount - /boot/firmware... [ OK 18.204486] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. 0m] Started sys[ 18.216242] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 temd-networkd.service 18.227552] usbcore: registered new interface driver brcmfmac m - Network Configuration. [ 18.241102] bcm2835_audio bcm2835_audio: card created with 8 channels [ 18.241264] mc: Linux media interface: v0.10 [ 18.253614] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.bin (-2) [ 18.264792] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ OK 18.279469] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.bin (-2) 0m] List[ 18.290847] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.bin failed with error -2 ening on systemd-rfkil…l Switch Status /dev/rfkill Watch. [ 18.333161] videodev: Linux video capture interface: v2.00 [ 18.343610] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.bin [ 18.352645] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.txt (-2) [ 18.363793] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.txt (-2) [ 18.385558] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.txt [ 18.394795] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.clm_blob (-2) [ 18.455631] Console: switching to colour dummy device 80x25 [ 18.507796] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 18.515092] Registered IR keymap rc-cec [ 18.519091] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 18.526357] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input15 [ 18.537189] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 18.544737] Registered IR keymap rc-cec [ 18.548767] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 18.556103] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input16 [ 18.567714] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 18.574707] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 18.581215] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 18.588724] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 18.596038] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 18.603240] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 18.611644] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 18.618800] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.clm_blob (-2) [ OK ] Reached target sound.target - Sound Card. [ 18.670288] Console: switching to colour frame buffer device 200x75 [ 18.670898] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.clm_blob [ 18.701225] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 18.705059] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ OK ] Mounted boot-firmware.mount - /boot/firmware. [ 18.733029] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ OK ] Reached target local-fs.target - Local File Systems. Starting apparmor.service - Load AppArmor profiles... Starting systemd-tmpfiles-… Volatile Files and Directories... [ 18.832350] Bluetooth: Core ver 2.22 [ 18.836129] NET: Registered PF_BLUETOOTH protocol family [ 18.841551] Bluetooth: HCI device and connection manager initialized [ 18.848043] Bluetooth: HCI socket layer initialized [ 18.853088] Bluetooth: L2CAP socket layer initialized [ 18.858268] Bluetooth: SCO socket layer initialized [ OK ] Finished systemd-tmpfiles-…te Volatile Files and Directories. [ 18.936415] Bluetooth: HCI UART driver ver 2.3 [ 18.940979] Bluetooth: HCI UART protocol H4 registered [ 18.946320] Bluetooth: HCI UART protocol LL registered [ 18.948980] audit: type=1400 audit(1677582949.963:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=461 comm="apparmor_parser" [ 18.951557] Bluetooth: HCI UART protocol ATH3K registered [ 18.966764] audit: type=1400 audit(1677582949.963:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=462 comm="apparmor_parser" [ 18.972291] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 18.987764] audit: type=1400 audit(1677582949.963:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=462 comm="apparmor_parser" [ 18.994374] Bluetooth: HCI UART protocol Intel registered [ 19.010372] audit: type=1400 audit(1677582949.991:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=463 comm="apparmor_parser" [ 19.016164] Bluetooth: HCI UART protocol Broadcom registered [ 19.017411] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 19.017569] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 19.034772] audit: type=1400 audit(1677582949.991:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=463 comm="apparmor_parser" [ 19.039829] Bluetooth: HCI UART protocol QCA registered [ 19.047288] audit: type=1400 audit(1677582949.991:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=463 comm="apparmor_parser" [ 19.047299] audit: type=1400 audit(1677582949.991:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=463 comm="apparmor_parser" [ 19.054889] Bluetooth: HCI UART protocol AG6XX registered [ 19.054950] Bluetooth: HCI UART protocol Marvell registered Starting systemd-timesyncd… - Network Time Synchronization... [ 19.134505] uart-pl011 fe201000.serial: no DMA platform data Starting systemd-update-ut…rd System Boot/Shutdown in UTMP... [ OK ] Finished apparmor.service - Load AppArmor profiles. [ OK ] Finished systemd-update-ut…cord System Boot/Shutdown in UTMP. [ OK ] Started systemd-timesyncd.…0m - Network Time Synchronization. [ OK ] Reached target sysinit.target - System Initialization. [ OK ] Started systemd-tmpfiles-c… Cleanup of Temporary Directories. [ OK ] Reached target time-set.target - System Time Set. [ OK ] Started apt-daily.timer - Daily apt download activities. [ OK ] Started apt-daily-upgrade.… apt upgrade and clean activities. [ OK ] Started dpkg-db-backup.tim… Daily dpkg database backup timer. [ OK ] Started e2scrub_all.timer€¦etadata Check for All Filesystems. [ 19.370913] Bluetooth: hci0: BCM: chip id 107 [ 19.375612] Bluetooth: hci0: BCM: features 0x2f [ OK 19.381706] Bluetooth: hci0: BCM4345C0 0m] Star[ 19.386000] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 ted 19.392776] bluetooth hci0: firmware: failed to load brcm/BCM4345C0.raspberrypi,4-compute-module.hcd (-2) 1;39mfst[ 19.403129] bluetooth hci0: firmware: failed to load brcm/BCM4345C0.raspberrypi,4-compute-module.hcd (-2) rim.timer - Discard unused b[ 19.415722] bluetooth hci0: firmware: direct-loading firmware brcm/BCM4345C0.hcd locks on[ 19.423826] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.hcd' Patch ce a week. [ OK ] Started logrotate.timer - Daily rotation of log files. [ OK ] Reached target timers.target - Timer Units. [ OK ] Listening on dbus.socket€¦- D-Bus System Message Bus Socket. [ OK ] Listening on ssh.socket€¦penBSD Secure Shell server socket. [ OK ] Reached target sockets.target - Socket Units. [ OK ] Reached target basic.target - Basic System. [ OK ] Started cron.service -…kground program processing daemon. Starting dbus.service - D-Bus System Message Bus... Starting e2scrub_reap.serv…e ext4 Metadata Check Snapshots... Starting rpi-set-sysconf.s…m - Set up system configuration... Starting systemd-logind.se…ice - User Login Management... Starting systemd-rfkill.se…Load/Save RF Kill Switch Status... [ OK ] Started dbus.service - D-Bus System Message Bus. [ OK ] Started systemd-rfkill.ser…- Load/Save RF Kill Switch Status. [ 19.762410] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ OK ] Finished ifupdown-pre.serv… synchronize boot up for ifupdown. [ OK ] Reached target bluetooth.target - Bluetooth Support. Starting networking.service - Raise network interfaces... Starting wpa_supplicant.service - WPA supplicant... [ OK ] Finished rpi-set-sysconf.s…[0m - Set up system configuration. [ OK ] Started systemd-logind.service - User Login Management. [ OK ] Started wpa_supplicant.service - WPA supplicant. [ OK ] Finished e2scrub_reap.serv…ine ext4 Metadata Check Snapshots. [ 20.194838] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 20.243163] Bluetooth: hci0: BCM: features 0x2f [ 20.249533] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0187 [ 20.255164] bcmgenet fd580000.ethernet eth0: Link is Down [ 20.255810] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0370 [ 20.774460] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 24.350481] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 24.358855] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Finished networking.service - Raise network interfaces. [ OK ] Reached target network.target - Network. Starting ssh.service - OpenBSD Secure Shell server... Starting systemd-user-sess…vice - Permit User Sessions... [ OK ] Finished systemd-user-sess…ervice - Permit User Sessions. [ OK ] Started getty@tty1.service - Getty on tty1. [ OK ] Started serial-getty@ttyS1…rvice - Serial Getty on ttyS1. [ OK ] Reached target getty.target - Login Prompts. [ OK ] Started ssh.service - OpenBSD Secure Shell server. [ OK ] Reached target multi-user.target - Multi-User System. [ OK ] Reached target graphical.target - Graphical Interface. Starting systemd-update-ut… Record Runlevel Change in UTMP... [ OK ] Finished systemd-update-ut… - Record Runlevel Change in UTMP. Debian GNU/Linux 12 cm4iob ttyS1 cm4iob login: